Posted October 22, 2004 - updated December 28, 2007
Modern Perreault Conversion Circuit
DESCRIPTION
1. S1 is closed first to charge C1. Once C1 is charged S2 is closed to initiate the tank circuit.
2. The automobile ignition coil transforms the high voltage on the primary side to a lower voltage at a higher current.
3. The primary is tuned to the secondary for resonance.
4. A pre-glow discharge is present in the ion valve.
5. Electrons are created in the ion valve through ultraviolet light (radiant energy) reactions. The valve is an energy multiplying transducer.
6. The insulated wire and ground serve as a source of ambient voltage potential.
Basic Tesla Conversion Circuit
Reference
http://www.nuenergy.org/alt/radiant_energy_diatribe
Alternative Energy Research Archive
Nu Energy Horizons, P. O. Box 22, Rumney, New Hampshire 03266-0022 USA
Copyright © 2004 & 2005 All Rights Reserved